Business Solutions

Bulk Phone Case Orders: How Volume Changes the Order

Bulk orders change everything — runs, colours, QC and payment. How volume works at a phone case factory, from 500 pcs per order to repeat runs.

Electroplated transparent fold-cover magnetic case with 360-degree rotating stand, silver
The short answer: A bulk order is not a small order made bigger.

  1. How is a bulk order counted?

Start here, because this is where most first-time bulk buyers get surprised. Ask any supplier one question before you plan anything: is the minimum counted per order, per model, or per colour?
Our terms are simple: bulk and distributor orders start at 500 pcs per order in total — not per model, not per colour. A distributor can mix models and colours inside that one order until the total reaches 500 pcs. Small and test orders use our standard MOQ of 50 pcs per colour per model.
Why the distinction matters: if a supplier quotes a 500 pcs minimum per model, a ten-model range costs 5,000 pcs before you have sold a single case. Always ask how the minimum is counted, and get the answer in writing before you plan the range.

  1. What changes when you go from 50 to 500 to 5,000 pcs?

Volume changes the order in four ways — and none of them is the price, which you agree case by case in the quotation.


At 50 pcs per colour per model — the test order. This is how you start: one style, one or two colours, one model. The test order answers one question — does this supplier deliver what it promised? Check the fit, the material, the magnet and the print against the sample — and watch whether the photos and video arrive before the balance is paid. Never skip it.
At 500 pcs per order — the first bulk order. Now you are planning a range, not a single case. The same 500 pcs can be split across several models and colours, so think in ranges: the models your customers actually buy, in the colours that sell. The factory runs your order as a production run, not a sample batch — the same style, made in one run, in your colours. Confirm the split in writing — model, style, colour, quantity per colour — before the deposit.

At 5,000 pcs and above — the repeat buyer. Now the question is no longer “can the factory make it” but “can it make it again, exactly the same”. Colour consistency across runs, the same mould, the same packaging — these decide whether your shops can reorder with confidence. A factory with its own moulds and a monthly capacity of 500K+ pcs can run the same style again in three months; a supplier that buys from somewhere else cannot promise that. Ask for repeat supply in writing, and check it with a second order before you commit to a large one.


  1. How do you plan colours and models for a bulk order?

Plan it in three passes, not like a shopping list.
First, the models. Start from the models your customers already ask for, not from the full catalogue. A factory holds moulds for specific models — ask for the mould and model list in writing, and build the range from the models covered by existing tooling. Models without tooling need new moulds, and that changes the first-order plan.
Second, the colours. Colours are where bulk orders go wrong. Every colour is its own run, so put the volume behind the colours that sell: the black and clear that move every week, plus one or two seasonal colours as a test. Do not split 500 pcs across ten colours.
Third, the styles. A range needs a backbone and a test. The backbone is the style your customers already buy — MagSafe magnetic, liquid silicone, clear. The test is one new style in a small quantity, to learn whether it sells before you commit volume to it. Read more
Write the plan down — model, style, colour, quantity per colour — and send it as one message. A real factory can confirm it or correct it in one reply; a middleman will come back with questions that show it never read the plan.

  1. How is quality checked at volume?


You cannot open every box in a bulk order, so quality at volume is about evidence and comparison — not about inspecting each case yourself.
Check one: the approved sample. Before the bulk order, approve a sample of the exact style, colour and model. That sample is the standard the whole order is judged against — keep it. When the goods arrive, compare them with the sample — the fit, the colour, the magnet, the print. If the bulk goods do not match it, the sample is the proof. Samples are free for distributors.
Check two: the evidence before the balance. After the goods are ready, we send photos and a video of the actual goods, plus the packing list — and only then is the balance paid. Ask any supplier what evidence it sends before the balance, and when. A supplier that sends nothing before the balance is asking you to pay for goods you have not seen.
Check three: the spot check on arrival. When the shipment arrives, open a sample of cartons and check them against the approved sample. Count the cartons against the packing list first, then check the cases. If anything is wrong, raise it with the photos and the packing list in hand. Run the same seven checks every time, and a bad run shows up before it reaches your customers.

  1. How do payment and timing work on a bulk order?


Two things buyers get wrong on bulk orders: they pay on a verbal promise, and they order when they need the goods, not before.
Payment. Our terms are T/T and Western Union only, and they are the same at every volume. New customers pay a 30% deposit first; after the goods are ready we send photos, a video and the packing list; the customer pays the balance, and then the goods ship. Get the terms in writing before the deposit. If a supplier asks for full payment before production, or will not put the terms in writing, do not place a bulk order. Read more
Timing. A bulk order takes longer than a test order, because it is a production run — and a repeat run takes planning too. Order before you need the goods, not when the shelf is empty. Plan backwards from the date the goods must be in your warehouse, and ask the supplier for the production plan in writing for your order — not a general promise, but the plan for your models, colours and quantities. Read more
Read the quotation line by line before the deposit — model, style, colour, quantity per colour, packaging, payment terms — because the quotation is the order. Anything agreed by message and left out of it is not agreed. Read more

  1. How do you keep the second order identical to the first?


The first bulk order tests the factory. The second tests the partnership — and this is where distributors are won or lost. Your shops expect the same case, in the same colour, at the same quality, month after month. Three things make that possible.
Same mould, same colour, same packaging — in writing. When you reorder, send the same specification you approved the first time: model, style, colour, quantity per colour, packaging. Name the colour the way the factory named it, and refer to the first order by its details. Do not say “the same as last time” and hope — write it down.
Same supplier, same line. A factory that makes the case on its own line can run it again. A supplier that bought it from somewhere else has to find the same source again, and the second run may come from a different line or batch. That is why distributors vet for repeatability before the first bulk order, not after it. Read more
Same check, every time. Compare the second order against the same approved sample, ask for the same photos, video and packing list before the balance, and spot-check the same way on arrival. If the second order matches the first, you have a supply line — and that is what a distributor actually buys.

FAQ

What is the minimum for a bulk phone case order? Our bulk and distributor orders start at 500 pcs per order in total — not per model, not per colour. You can mix models and colours inside one order. Small and test orders use our standard MOQ of 50 pcs per colour per model.
How should I split 500 pcs across models and colours? Start from the models your customers already buy, in the colours that sell — black and clear first, plus one or two seasonal colours as a test. Do not split 500 pcs across ten colours; each colour is its own run.
How do I know the bulk order will match the sample? Approve a sample first, then compare the bulk goods against it. We also send photos, a video and the packing list of your actual goods before the balance is paid. Spot-check cartons on arrival against the approved sample.
What payment terms apply to bulk orders? The same as every order: T/T and Western Union only. New customers pay a 30% deposit first; after the goods are ready we send photos, a video and the packing list; the customer pays the balance, and then the goods ship.
Can I reorder the same style later? Yes — that is the point of a bulk relationship. Send the same specification in writing (model, style, colour, quantity per colour, packaging) and we run it again on the same moulds. Ask for repeat supply in writing before the first bulk order.

About iFunSmart

Ifun Electronics Technology Co., Ltd, Guangzhou, since 2010. A phone case factory — 1,000+ designs, 500+ models, 500K+ pcs/month, exported to 30+ countries. MOQ 50 pcs per colour per model; bulk and distributor orders from 500 pcs per order in total; free samples for distributors. Ask us for a live video call from our production line, our mould and model list, or a sample — we reply within 24 hours. New customers pay 30% deposit by T/T or Western Union; we send photos, a video and the packing list before the balance. WhatsApp https://wa.me/8613632248734 — Email contact@ifunsmart.com