MagSafe Cases in 2026: N52 vs N45, 2700 Gauss, and How to Test the Magnet Before You Order
"Strong MagSafe" means nothing until you test it. What N52 and N45 actually mean, what 2700 Gauss measures, and the 3 tests to run on a sample before you order 500 units.

The short answer: A MagSafe case is only as good as its magnet ring. N52 is the strongest commonly used neodymium grade — stronger than N45 — and 2700 Gauss is the peak magnetic field our 2700GS case measures at the magnet surface. But no number on a spec sheet tells you how the case feels in your hand: test a sample on your own charger, your own wallet and your own car mount before you order. If a supplier cannot tell you the magnet grade in writing, do not order. Send model, style, quantity and country on WhatsApp https://wa.me/8613632248734 — we reply within 24 hours with MOQ, sample cost and lead time for that model.
1. N52 vs N45 — what the grade actually means
Neodymium magnets are graded by strength, and the grade is written as a letter plus a number — N45, N48, N52. A higher number means a stronger magnet made from the same material. N52 is the strongest grade in common production use; N45 is a step below it. The grade describes the magnet material itself, not the finished case: two cases can both say "N52" and hold very differently, because the ring can be thicker or thinner, wider or narrower, and placed more or less precisely. So the grade is the first thing to ask for, but never the only thing. Read more: https://www.ifunsmart.com/posts/n52-vs-n45-magnet-grade-magsafe-case
2. What 2700 Gauss measures — and what it does not
Gauss measures magnetic field strength. When we say our 2700GS Magnetic Case measures up to 2700 Gauss, that is the peak field at the surface of the magnet ring, measured on the finished case. It is a real, checkable number — and it is also a number that needs its context: magnetic pull drops quickly with distance, so a thick case back, a wallet, or a phone with its own case in between all weaken the hold. A high Gauss figure at the surface does not guarantee a strong hold through two layers of leather. That is why the number belongs on the spec sheet and the test belongs in your hand. Read more: https://www.ifunsmart.com/posts/magnetic-claims-you-can-back
3. Why some "MagSafe" cases feel weak
Four causes cover most complaints. First, the ring is too small or too thin — there is a magnet, but not enough of it. Second, the ring is misaligned with the phone's own magnet array, so the case snaps on slightly off-centre and slides. Third, the case back is too thick, or has a metal plate or decorative layer between the magnet and the charger. Fourth, the magnets are a lower grade than claimed, and the claim was never written down. If a case fails your test, ask which of the four it is — a supplier who knows their own product can answer in one sentence. Read more: https://www.ifunsmart.com/posts/magnet-grade-written-spec
4. The 3 tests to run on a sample
Order 1–5 samples first and run these three tests on a real handset, with your own accessories — not the supplier's.
- Charger test: snap the case onto your own MagSafe charger, lift the phone by the charger, and give it a gentle shake. Then charge for 10 minutes and check it is actually charging, not just attached.
- Wallet test: attach your own MagSafe wallet, hold the phone upside down, and shake once. A wallet that drops in your pocket will cost you a customer.
- Car mount test: put the cased phone on your own car mount and drive your normal route. Vibration and heat are where weak magnets show up.
If a sample fails any one of the three, say so in writing and ask what changes before the bulk order. A sample that passes all three is the only evidence that matters.

5. What to ask the factory in writing
Ask for these five things before you pay, in writing: the magnet grade (N52, N48 or N45); the Gauss figure and how it was measured; the ring position and size relative to the phone's magnet array; the case back thickness at the magnet; and a sample you can test on your own charger, wallet and mount. MOQ is 50 pcs per colour per model. If the answer to any of the five is vague, treat that as information — the magnet file is not ready, and your customers will be the ones who find out. Read more: https://www.ifunsmart.com/posts/phone-case-wholesale-china-buying-direct-manufacturer
FAQ
Is N52 always better than N45? As a magnet material, yes — N52 is stronger than N45. But the finished case also depends on ring size, thickness and alignment, so test the sample rather than buying on the grade alone.
What does 2700 Gauss mean? It is the peak magnetic field measured at the surface of the magnet ring on our 2700GS case. Pull drops with distance, so test through your own wallet and mount as well.
Will a MagSafe case work with any MagSafe charger? It should snap onto a standard MagSafe charger and charge, but alignment and back thickness vary — run the charger test on your own charger before ordering in bulk.
What is the MOQ for MagSafe cases? MOQ is 50 pcs per colour per model. Send the model, style and colour count and we confirm in writing.
Can the factory print my logo on a MagSafe case? Yes — logo printing and custom packaging are standard OEM options. Send the logo file and we confirm the process in writing.
About iFunSmart
Ifun Electronics Technology Co., Ltd, Guangzhou, since 2010. 1,000+ designs, 500+ models, 500K+ pcs/month, exported to 30+ countries. Our 2700GS Magnetic Case for iPhone 18 Pro Max uses up to 2700 Gauss, N52 magnets. Product: https://www.ifunsmart.com/phone-cases/2700gs-magnetic-case-iphone-18-pro-max — WhatsApp https://wa.me/8613632248734 — Email contact@ifunsmart.com



