BLUF
The Galaxy S26 Ultra has no built-in magnets — it is Qi2 Ready, so the magnet has to live in the case. Order a magnetic case with an N52 ring, check S Pen access and charging on the sample, and start at MOQ 50.
Short answer
The Galaxy S26 Ultra is Samsung's biggest phone of 2026 — a 6.9-inch screen, an S Pen in the body, and 25W Qi2.2 wireless charging — but it has no magnets built into the phone. Samsung calls it "Qi2 Ready": it charges wirelessly at full speed only when a magnetic case puts the ring where the phone has none. That makes the magnetic case the first case an S26 Ultra buyer should order, not an accessory to add later. Our magnetic range for the S26 Ultra covers the styles buyers actually ask for — a matte magnetic everyday case, a frosted magnetic case, a rugged magnetic Armor build, a clear magnetic case, a ring-stand magnetic case and a decorative magnetic case — each one built around an N52 magnetic ring, so the phone holds on a charger, a car mount and a desk stand. Our most common MOQ is 50 pcs per colour per model, bulk distributor orders start at 500 pcs per order in total, and samples are free for distributors. The rest of this guide is the fit check: which magnetic style suits which buyer, how the S Pen stays usable, and what to test on the sample before the bulk order.
1. What "magnetic" means on the S26 Ultra — Qi2 Ready, not MagSafe built in
The first thing to get right about the S26 Ultra is what Samsung did not put in it. The phone has no magnets in its back. Apple builds magnets into the iPhone; Samsung does not build them into the S26 Ultra. The phone is Qi2 Ready, which is Samsung's way of saying the phone supports the Qi2 wireless-charging standard and charges at up to 25W — but only when the magnet that aligns the charger sits in the case, not in the phone.
That distinction decides what you are buying. A magnetic case for the S26 Ultra is not a case with a magnet added for convenience. It is the part that makes the phone's wireless charging work at full speed. Without a magnetic case, the phone still charges wirelessly on a flat pad, but the charger has nothing to align to: the phone can slide off-centre, charging slows, and the phone heats. With a magnetic case, the ring in the case snaps the phone onto the charger in the right place every time, and the 25W Qi2.2 charging the phone supports actually happens.
It also decides what "MagSafe" means here. MagSafe is Apple's name for its magnetic system, and the S26 Ultra is not an iPhone. When buyers ask for an "S26 Ultra MagSafe case", what they mean in practice is a magnetic case whose ring lines up with the Qi2 charging coil and works with the magnetic chargers, mounts and wallets their customers already own. Our magnetic cases use an N52 ring — the same magnet grade Apple uses — so the case works with the magnetic chargers and mounts built for that standard. The wording on the order should say "magnetic case, N52 ring, Qi2 Ready" rather than "MagSafe", because that is what the phone actually supports, and a buyer who promises a customer a MagSafe phone is promising something Samsung never built.
Two more facts frame the whole guide. First, the S26 Ultra is a large, heavy phone — 163.6 by 78.1 by 7.9 millimetres and 214 grams — so the magnet has to hold more weight than it does on a smaller phone, and the ring has to be strong enough to hold the phone on a car mount through a turn, not just on a desk charger. Second, the S Pen lives inside the phone, in a silo at the bottom edge, so a magnetic case has to leave the S Pen slot clear and the pen usable — a case that blocks the pen breaks the feature that makes the Ultra the Ultra. Both points are checked on the sample, in sections 4 and 6.
2. The magnetic ring: N52, and what to check
Every magnetic case in our range is built around an N52 ring. N52 is the magnet grade — the strongest standard grade of neodymium magnet — and it is the grade our magnetic range is built on. The field strength varies by style, and each product page states its own figure: the Clear Glitter magnetic case states 2600 Gauss, and the Silky-Frosted magnetic case states 2400gf of pull force. A buyer comparing two of our magnetic styles should compare the build and the extras, not the magnet figure alone — a stronger figure on paper does not help if the ring is glued on and peels, or if it sits off-centre from the charging coil.
What the numbers do not say is just as important. They do not say how the ring is held in the case, and that is where magnetic cases fail. A ring glued onto the back of a case can peel off after a few months of heat and use; a ring moulded into the case wall cannot. Ask us how the ring is fixed in the style you order, in writing, before the bulk order — and check it on the sample by pressing the ring and by pulling the phone off a magnetic charger twenty times. A ring that lifts at the edge on the sample is a ring that lifts in the customer's hand.
The ring's position matters as much as its strength. The ring in the case must sit exactly over the phone's own charging coil, or charging slows and the phone heats. The coil sits in the centre of the phone's back, so the ring must be centred on the case — and on a phone as large as the S26 Ultra, a ring that is a few millimetres off-centre is a ring that misses the coil. Check it on the sample with a real charger: put the phone on a magnetic charger with the case on, confirm that it snaps into place and charges, and feel whether the phone heats beyond what it does without a case. Do the same test with the thickest magnetic style you order, not only with the thinnest — a ring-stand case is thicker than a plain magnetic case, a rugged Armor case is thicker still, and a metal-stand case is thickest of all, and the magnet has to work through all of them.
One more check, specific to the S26 Ultra: the mount. A phone this size lives on a dashboard mount, a bike mount or a desk stand, and the case has to hold it there through a turn and a bump. Check the sample in the mount your customer uses, with the case on and any stand folded flat. A ring that does not fold flat will catch on the mount, and a case that does not sit square in the mount will work loose on the road. The mount test is a five-minute check that saves a returned order — and on a 214-gram phone, it is the check that decides whether the magnet is strong enough.
3. The confirmed S26 Ultra magnetic styles — which buyer each one suits
Eight magnetic styles on our site are confirmed for the S26 Ultra or the S26 range, each with MOQ 50 pcs per colour per model and logo customisation plus custom packaging confirmed on its product page. They fall into six builds, and each build suits a different buyer. Order the build for the buyer, not the colour for the shelf.
Matte magnetic everyday — the case that sells first. This is the most common magnetic build in the range: a matte cover with a centred magnetic ring, no stand, no extra hardware, just the magnet and the protection. It suits the everyday buyer who wants a case that charges, mounts and feels good in the hand, and the distributor who needs one safe style that sells across the whole S26 Ultra market. Our Bear Hug 2.3 Magnetic Case carries this build for the S26 Ultra, with a matte cover and a centred magnetic ring; the Silky Touch Matte MagSafe Case carries the same idea across the Samsung S26, S25, S24 and S23 ranges, with an N52 ring stated on its page. Check the matte finish on the sample: it should feel smooth, not sticky, and it should not show every fingerprint — a matte case that marks easily is a case your customer complains about in the first week.
Frosted magnetic — the grip case. This build adds a frosted, silky finish to the magnetic case: a soft-touch surface that grips better than a smooth matte case and hides fingerprints. It suits the buyer whose customers hold the phone one-handed all day — drivers, delivery couriers, field staff — and who wants the magnet without the shine. Our Magnetic Silky-Frosted Shockproof Case carries this build for the S26, S26 Plus and S26 Ultra, with an N52 ring and 2400gf of pull force stated on its page. Check the frosted finish on the sample: rub it with a fingertip and look for marks, and check that the finish does not wear smooth at the edges after a week of handling. A frosted case that goes shiny at the corners is a case that looks old before it is sold.
Ring-stand magnetic — the stand that is always there. This build adds a 360-degree rotating ring stand to the magnetic case: the ring props the phone up to watch video or take a video call, folds flat when it is not needed, and doubles as a grip while the phone is held one-handed. It suits the buyer who props the phone up on a dashboard or a desk, and the outdoor buyer who watches a route or a video on the trail. Our Silky Matte MagSafe Case with Ring Stand carries this build on a page written for the S26 Ultra itself, with a 360-degree rotating magnetic ring stand; the page states no magnet grade, so ask us to confirm the ring spec in writing before you order. Check the ring on the sample: rotate it through its full turn, feel for catching or looseness, and check that it locks where it is put and folds flat. A ring that spins freely will not hold the phone upright, and a ring that does not fold flat will catch in a pocket and on a mount.
Rugged magnetic Armor — the worksite build. This build pairs the magnet with a dual-layer Armor case: a hard PC back, a soft TPU bumper and reinforced corners, plus a stand. It suits the field-team buyer, the outdoor retailer and the logistics buyer — the customer whose phone works on a building site, in a van or on a trail. Our Heavy Duty Armor MagSafe Case with a 360-degree ring stand carries this build with an N52 ring, listed for Samsung S26; our Mech Armor MagSafe Case adds a foldable zinc alloy camera stand, also with an N52 ring, listed for Samsung S25 and S26. Both are listed for the S26 range rather than the Ultra by name, and their product pages list compatibility as Samsung Series — so ask us to confirm the S26 Ultra fit in writing before you order, and check the fit on the sample against a real S26 Ultra, not against a smaller S26. Check the stand the way you would check any metal part: open it, close it, feel for sharp edges, and check that the metal does not scratch the case it folds against. And ask us for the drop-test report for the model you order, in writing — the product pages carry their own drop wording, and the report is what your customer should be shown, not the wording.
Clear magnetic — the case that shows the phone. This build is a clear case with a magnetic ring: the customer sees the phone, and the case still charges and mounts. It suits the retail buyer who sells on looks and the customer who bought the Ultra for its design and does not want to hide it. Our Clear Glitter MagSafe Case carries this build for the S26 Ultra, with an N52 ring rated at 2600 Gauss stated on its page and a glitter back that catches the light. Check two things on the sample that no photo shows: whether the clear back yellows, and whether the glitter sits inside the case wall or on top of it. A clear case that yellows in a month is a case that comes back, and glitter that sits on the surface wears off in a pocket — ask us how the glitter is sealed, in writing, before the bulk order.
Decorative magnetic — the case that sells on the shelf. This build adds decoration to the magnet: a rhinestone edge, a glitter ring, a finish that stands out in a shop display. It suits the retail buyer who sells on the shelf and the gift buyer who wants a case that looks like a present. Our Bling MagSafe Case carries this build with a built-in high-grade magnet and a rhinestone edge plus a glitter magnetic ring, with Samsung S26 Series in its compatibility list — ask us to confirm the S26 Ultra fit in writing before you order, as with the Armor builds. Check the decoration on the sample the way a customer would: run a fingertip over the rhinestone edge and check that no stone lifts, and check that the glitter ring sits flat so the phone still mounts square. A stone that lifts in the customer's hand is a case that comes back the same week.
Six builds, one magnet idea. The build you order is the buyer you serve — and a range that mixes two or three builds sells better than a range that stocks one build in six colours, because the everyday buyer, the field-team buyer and the retail buyer are three different customers.
4. S Pen access — the check only the Ultra needs
The S Pen is the reason a customer buys the Ultra instead of the S26 Plus, and it is the feature a bad case breaks first. The pen lives in a silo at the bottom edge of the phone, and the case has to do three things: leave the silo opening clear so the pen comes out and goes back in, leave the bottom edge thin enough that the pen can be pulled out by its end, and keep the pen's tip usable on the screen without the case edge getting in the way.
Check all three on the sample. Take the pen out and put it back ten times: it should slide out with a fingertip and click back in, not stick and not sit proud of the edge. A case with a thick bottom bumper can cover the silo opening just enough that the pen catches — invisible in a photo, obvious in the hand. Then write with the pen on the screen, especially near the edges: the case's raised lip must not lift the pen off the glass at the corners, or the customer's handwriting stops at the edge of the screen. And check the pen's button and air actions, if your customer uses them, with the case on — a case that changes how the pen feels in the hand changes how the customer uses the phone.
One more Ultra-specific point: the camera. The S26 Ultra carries its lenses in a row down the back, and a magnetic case needs a raised lip around them so the lenses never touch a flat surface. Check the lip on the sample the same way as on any other case: set the phone face down and look from the side — the lip should touch the table, not the lenses. A magnetic case that protects the charging but not the lenses is a case that fails on the second week, when the customer notices the scratches.
5. Charging and mounts with a magnetic case
A magnetic case changes how the phone charges, and the change is worth explaining to your customer, because it is the reason the case exists.
On a magnetic charger, the case snaps the phone into the right place and holds it there, so the 25W Qi2.2 charging the S26 Ultra supports actually happens. On a flat pad with no magnet, the phone can slide off-centre and charging slows. On a wired charger, the case changes nothing — the cable plugs in the same way — but the case must leave the charging port clear, with enough room for the cable your customer uses. Check the port cutout on the sample with a real cable, not a thin one: a cutout that fits the factory cable and not the customer's thicker cable is a cutout that fails in the customer's car.
On a car mount, the magnet is the whole product. The mount holds the phone by the ring in the case, so the ring has to be strong enough for a 214-gram phone through a turn and a bump, and the case has to sit square in the mount. Check the sample in the mount your customer uses — dashboard, vent or bike — and drive a turn with it, or at least shake it by hand the way a road would. A magnet that holds on a desk and fails on a bumpy road is a magnet that fails in the customer's car, and a field-team phone spends more time in a car mount than on a desk.
On a desk stand or a wallet, the same rule applies: the ring must hold the phone at the angle the stand sets, and a magnetic wallet must stay on the back of the case when the phone goes into a pocket. Check the wallet on the sample with the number of cards your customer carries, and pull the phone out of a pocket ten times — a wallet that slides off in a pocket is a wallet that loses a bank card.
And one caution to pass on: a magnetic case and a metal plate do not mix. Some car mounts use a metal plate stuck to the back of the phone, and a plate stuck onto a magnetic case blocks the ring and slows charging. If your customer uses a plate mount, they need a mount that grips the case, not a plate — say so in the order, and ask us in writing which mount styles fit the case you order.
6. What to check on the sample before the bulk order
A sample is not a souvenir. It is the only proof that the case fits this phone, the ring holds, the S Pen comes out, and the phone still charges. Run these checks on every magnetic style before you approve the bulk order.
Fit. Fit the case to the phone and the phone to the case. All buttons must press cleanly, the charging port must take a real cable, the speaker holes must line up, and the case must not lift at the corners when the phone is twisted gently. A case that fits badly on the sample fits badly on ten thousand units.
Magnet. Put the phone on a magnetic charger with the case on and confirm it snaps into place and charges. Pull it off and put it back twenty times. Put it on a car mount and shake it. A ring that lifts at the edge, or a magnet that holds on a desk and fails on a mount, is a ring that fails in the customer's first week.
S Pen. Take the pen out and put it back ten times. Write with it near the screen edges. The silo must stay clear, the pen must click back in, and the lip must not lift the pen off the glass.
Camera lip. Set the phone face down and look from the side: the lip should touch the table, not the lenses. Do the same for the screen — the lip around the screen should stand proud of the glass.
Stand, slide and slot. If the style has a ring stand, rotate it through its full turn and check it locks where it is put and folds flat. If it has a slide camera cover, slide it open and shut twenty times and check it sits flush when closed. If it has a card slot, load it with the cards your customer carries and shake the phone — the cards must stay put.
Colour and finish. Check the colour against the swatch, not the screen: a colour that looks right on a product photo and wrong in the hand is a colour your customer returns. Check the finish for fingerprints and scratches — a matte case that shows every fingerprint is a case your customer complains about, and a clear case that yellows is a case that comes back.
Packaging and logo. Confirm the packaging and the logo method on the sample order, in writing, before the bulk order: the box, the barcode, the logo position and the logo method. A logo that sits in the wrong place on the sample sits in the wrong place on ten thousand units.
Seven checks, one sample, no shortcuts. A supplier who rushes the sample check is a supplier who ships the problem to your warehouse.
7. Your first S26 Ultra magnetic order — models, colours, MOQ
Start with the buyer, not the catalogue. An S26 Ultra magnetic case sells to three buyers: the everyday buyer who wants a magnetic case that charges and mounts, the outdoor and field-team buyer who wants a rugged magnetic case that survives a working day, and the retail buyer who wants a clear magnetic case that shows the phone. Order the style for the buyer, and order the colour depth for the channel: a distributor selling to shops needs breadth across colours; a corporate buyer needs depth in one or two colours with a logo.
Our most common MOQ is 50 pcs per colour per model, and it varies by product line — ask us for the MOQ on the exact style you order, in writing, before you promise a quantity to a customer. Bulk distributor orders start at 500 pcs per order in total, and a bulk order can mix models and colours inside that total — ask us to confirm the mix in writing when you place the order. Samples are free for distributors, and a sample order is the cheapest insurance in this guide: order one of each style you plan to stock, run the seven checks in section 6, and only then place the bulk order.
Put the full model name on every order line — "Samsung Galaxy S26 Ultra", not "S26" and not "Galaxy S26" — because the S26, the S26 Plus and the S26 Ultra are three different phones with three different sizes, and a case for the wrong one fits nothing. Put the colour, the style and the logo method on the same line, and confirm the whole line in writing before the factory starts. A first order that is right is a second order that is easy; a first order that is wrong is a warehouse full of cases for the wrong phone.
Payment follows our standard terms: T/T and Western Union only. New customers may pay a 30% deposit first; after the goods are ready the factory sends photos, a video and a packing list; the customer pays the balance, and then the goods ship. Ask us for the current production window in writing when you place the order — never promise your customer a delivery date the factory has not confirmed.
FAQs
Can I order S26 Ultra MagSafe cases wholesale?
Yes. The S26 Ultra has no magnets built in — it is Qi2 Ready — so the magnet lives in the case. Our S26 Ultra magnetic cases use N52 magnetic rings, work with magnetic chargers and mounts, and start at our most common MOQ of 50 pcs per colour per model, with bulk distributor orders from 500 pcs per order in total. Ask us for a quote in writing for the style and quantity you need — we never state a price in an article.
Does the magnetic ring work with car mounts and chargers?
Yes, when the ring is the right grade and the case is the right thickness. Our magnetic cases use N52 magnetic rings, and the ring is centred over the phone's charging coil so the phone snaps onto a magnetic charger and charges at the 25W Qi2.2 speed the S26 Ultra supports. Check it on the sample with the exact style you order and the mount your customer uses — a magnet that holds on a desk and fails on a bumpy road is a magnet that fails in the customer's car.
Can I still use the S Pen with a magnetic case on?
Yes — if the case leaves the S Pen silo clear. Check it on the sample: take the pen out and put it back ten times, and write with it near the screen edges. The silo opening must stay clear, the pen must click back in, and the case's raised lip must not lift the pen off the glass at the corners. A case with a thick bottom bumper can cover the silo just enough that the pen catches — invisible in a photo, obvious in the hand.
What is the MOQ for S26 Ultra magnetic cases?
Our most common MOQ is 50 pcs per colour per model, and it varies by product line — ask us for the MOQ on the exact style you order, in writing. Bulk distributor orders start at 500 pcs per order in total and can mix models and colours inside that total. Samples are free for distributors, so order one of each style first and run the sample checks in section 6 before the bulk order.
What does a wholesale S26 Ultra magnetic case cost?
We never state a price in an article, because the price depends on the style, the colour, the quantity and the logo method. What a quote should show, in writing, is the unit price per style, the MOQ per colour per model, the logo charge, the packaging, the deposit and the balance terms, and the production window. Send us the style, the quantity and the logo artwork and we will quote it — T/T and Western Union only, new customers may pay a 30% deposit first.
About iFunSmart
iFunSmart has made phone cases in Guangzhou since 2010 — 1,000+ designs, 500+ models, 500K+ pcs a month, shipping to 30+ countries. We answer within 24 hours. If you want a quote for S26 Ultra magnetic cases, send us the style, the quantity and your logo artwork on WhatsApp and we will quote it in writing.
Read more